SATO WS4 Series - Antenna; Software

90
Barcode
Available for
WS4 series
ESC+BL~ESC+d UPC-A Barcode (Font
Designation)
ESC+BL ~
ESC+d
Hex code
ESC
BL~d
Parameter
<1B>16
<42>16<4C>16 ~Font type
abbcccn~n~< d >n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies font type of UPC-A (with HRI characters)
[Format]
<BL>abbcccn~n ~ <d>n~n
●Parameter
a Barcode type = H : UPC-A (“H” fixed)
b Narrow bar width = Valid range : 01 to 12 dots
c Barcode height = Valid range : 001 to 999 dots
n Print data = Barcode data : 11 digits fixed
d Font = XU
XS
XM
XB
XL
OA
OB
U
S
M
WB
WL
n Print data = HRI data : 12 digits fixed
[Coding Example] Barcode type : UPC-A, Narrow bar width : 02, Barcode height : 120
Barcode data : 01234567890, Font type : XS, Translation data : 012345678905
<A>
<V>100<H>200
<BL>H0212001234567890
<XS>012345678905
<Q>2
<Z>
UPC-A Barcode
(HRI Font Designation)