SATO WS4 Series - Place a Media Roll and Test Media Feed

22
Modification
Available for
WS4 series
ESC+F Sequential Number
ESC+F
Hex code
ESC
F
Parameter
<1B>
16
<46>
16
aaaabcccc(,dd,ee,f)
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Sets before the font / barcode data is specified. Assigns the specified data a serial number (consecutive) and adds it to the print.
[Format]
<F>aaaabcccc (,dd,ee,f)
● Parameter
a [Print copies] = Valid range : 1 to 9999
b [Increase/Decrease] = + : Increase
- : Decrease
c [Starting number] = Valid range : 1 to 9999
d [Range of numeration (digits)] = Valid range : 1 to 99 when omitted: 8
e [Minimum downward count (digits)] = Valid range : 0 to 99 when omitted: 0
f [Decimal/ hexadecimal numeration] = Valid range : 0 to 99 when omitted: 0
0 : Decimal when omitted: 0
1 : Hexadecimal
[Coding example] Pages of print: 1, Increase/Decrease: +, Starting number: 1,
Range of numeration: 5 digits, Minimum downward count: 0
<A>
<V>100<H>100<P>2<L>0202
<F>1+1,5,0<OA>10000
<Q>2
<Z>
[Notes]
1. Up to 8 serial numbers can be specified for one format.
2. The inverse color setting <(> is not available for this function.
3. The automatic line feed <E> is not available.
4. To use this function, you need to print font or barcode together with serial number.
5. Digit number of font or barcode command should be the same with the one of [Range of numeration]. If it exceeds the digit number
of font or barcode command, serial number will not be printed.
[Valid commands]
WS4 series
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<U>
<S>
<M>
<WB>
<WL>
<OA>
<OB>
<$=>
<RD>
Barcode
<B>
<BC>
<BG>
<BI>
<BF>
<BP>
<D>
<D><d>
<BD>
<BT>
<BW>
<BL>
<BM>
.
Sequential Number