SATO WS4 Series - ESC+;D Print Field

214
Memory Card
Available for
WS4 series
ESC+/D Print Field
ESC+/D
HEX code
ESC
/D
Parameter
<1B>16
<2F>16<44>16
,aa,n~n
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will not be retained
Validity in a job
Retained until next valid setting
Validity after a job
Retained until next valid setting
[Function]
Recalls the field specified by the Store Field </N> command and selects the data.
[Format]
</D>,aa,n~n
●Parameter
a [Field No.] = Valid range: 1 to 99
n [Data] = Data to be changed
[Coding example]
<A>
<CC>1
<YR>,1
</D>,1,DEF
</D>,2,78901
</D>,3,49000238
<Q>2
<Z>
[Note]
1. Print digit number is valid within the Store Field </N> command.
2. When digit number of this command is longer than the one specified with the Store Field </N> command, only the defined digit number will
be available for printing.
3. Use this command in conjunction with the Recall Format <YR> command.
Print Field