SATO WS4 Series - ESC+TW Option Waiting Time

202
System
Applicable for
WS4 series
ESC+TW Option Waiting Time
ESC+TW
Hex code
ESC
TW
Parameter
<1B>16
<54>16<57>16
aaa
Default setting
aaa = 010(1000ms)
Persistence of the
command
When printer is powered off
Set parameter will be retained
Validity in a job
Retained until next valid setting
Validity after a job
Retained until next valid setting
[Function]
Specifies waiting time for options.
[Format]
<TW>aaa
●Parameter
aaa [Waiting time] = Valid range: 005 to 200 (unit: 100ms)
[Coding example] (waiting time = 1.5 seconds)
<A>
<TW>015
<Z>
[Notes]
1. This command specifies, in Tear-off mode, the waiting time between print completion and Tear-off motion.
2. The set parameter becomes valid soon after receiving the command and will be in effect after power off.
Option Waiting Time