SATO WS4 Series - Other Issues

52
Font
Available for
WS4 series
ESC+S S Font
ESC+S
Hex code
ESC
S
Parameter
<1B>
16
<53>
16
n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Font with the basic size of: width 8 dots, height 15 dots is specified.
[Format]
<S>n~n
● Parameter
n [Print data] = data
[Coding example]
<A>
<V>100<H>200<P>2<L>0304
<S>ABCDE
<Q>2
<Z>
[Notes]
1. The S font only allows the setting of a fixed pitch.
2. This font is to obtain compatibility with old printer models and shall not disclose to the users.
[Valid commands]
Print position
<V>
<H>
Modification
<P>
<L>
<%>
<F>
<&>
</>
<0>
<WD>
Barcode
<D><d>
<BL><d>
S Font
(Basic size 8x15 dots)