SATO WS4 Series - ESC+W2 Subnet Mask

199
System
Available for
WS4 series
ESC+W2 Subnet Mask
ESC+W2
Hex code
ESC
W2
Parameter
<1B>16
<57>16<32>16
a~a
Default setting
a~a=000000000000
Persistence of the
command
When printer is powered off
Set Parameter will be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Sets Subnet mask
[Format]
<W2>a~a
●Parameter
a~a [Subnet mask] = 12 digits fixed
[Coding Example]
<A>
<W2>255255255000
<Z>
[Notes]
1. Place this command between <A>start code and <Z> stop code.
2. This command may not be used in combination with other commands.
3. Setting can be printed on the factory test print.
4. The set parameter will become valid after rebooting.
5. Default setting of Subnet mask is as follows:
Subnet mask
000000000000
Subnet Mask