SATO WS4 Series - Media Thickness; Max Roll Diameter; Max Roll Diameter for Unwinder; Media Type

86
Barcode
Available for
WS4 series
ESC+EU Composite Symbol
ESC+EU
Hex code
ESC
EU
Parameter
<1B>16
<45>16<55>16
aabb(ccc)n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies composite symbol.
[Format 1]
<EU>aabbccn~n
●Parameter
a Barcode type = 01: GS1 DataBar Composite(CC-A/CC-B)
02: GS1 DataBar Truncated Composite(CC-A/CC-B)
03: GS1 DataBar Stacked Composite(CC-A/CC-B)
04: GS1 DataBar Stacked Omni-Directional Composite(CC-A/CC-B)
05: GS1 DataBar Limited Composite (CC-A/CC-B)
06: GS1 DataBar Expanded & Expanded Stacked (CC-A/CC-B)
07: UPC-A Composite (CC-A/CC-B)
08: UPC-E Composite (CC-A/CC-B)
09: EAN-13 Composite (CC-A/CC-B)
10: EAN-8 Composite (CC-A/CC-B)
b Narrow bar width = 01 to 12 (dots)
c Segment width = 02 to 22 (even number only)
* Supporting GS1 DataBar Expanded Composite (CC-A/CC-B) only
n Print data = Barcode data
Max. number of digit for linear barcode
GS1 DataBar Composite(CC-A/CC-B)
13 digits
GS1 DataBar Truncated Composite(CC-A/CC-B)
13 digits
GS1 DataBar Stacked Composite(CC-A/CC-B)
13 digits
GS1 DataBar Stacked Omni-Directional Composite(CC-A/CC-B)
13 digits
GS1 DataBar Limited Composite (CC-A/CC-B)
13 digits
GS1 DataBar Expanded Composite(CC-A/CC-B)
74 digits
UPC-A Composite(CC-A/CC-B)
11 digits
UPC-E Composite(CC-A/CC-B)
Specify linear data in the form of ”XX00000XXX”(X is variable)
10 digits
(fixed)
EAN-13 Composite(CC-A/CC-B)
12 digits
EAN-8 Composite(CC-A/CC-B)
7 digits
* Check digit will be automatically calculated and added.
* To specify the print of composite symbol, delimit 1D data and 2D data with '｜'(7CH).
Data = 1D data ｜ 2D data
* Specify GS1 DataBar Composite(CC-A/CC-B) data between 1st - 16th digit of GS1 DataBar Expanded
Composite(CC-A/CC-B).
* For GS1 DataBar Expanded Composite(CC-A/CC-B), up to 74-digit of numeric / 41-digit of alphabet can be
entered, including GS1 DataBar Composite(CC-A/CC-B) data. (Up to 41-digit of alphanumeric can be entered
including GS1 DataBar Composite(CC-A/CC-B) data)
* If a specified digit number is smaller than the maximum one of 1D data, this value will be zero filled at the front
end.
* In 2D data, up to 338-digit can be entered. Maximum digit number may vary depending on barcode symbologies.
Composite Symbol