SATO WS4 Series - Toolbar

58
Font
Available for
WS4 series
ESC+WL WL Font
ESC+WL
Hex code
ESC
WL
Parameter
<1B>
16
<57>
16
<4C>
16
an~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Font with the basic size of: W28 x H52 dots is specified.
[format]
<WL>an~n
● Parameter
a [Smoothing] = 0: Smoothing OFF
n [Print data] = Data
[Coding example]
<A>
<V>100<H>200<P>2<L>0304
<WL>0ABCDE
<Q>2
<Z>
[Notes]
1. The WL font only allows the setting of a fixed pitch.
2. If setting the smoothing option, and the expansion <L> command is set to 1 or 2, the smoothing function will be ignored.
3. This font is to obtain compatibility with old printer models and shall not disclose to the users.
[Valid commands]
Print position
<V>
<H>
Modification
<P>
<L>
<%>
<F>
<&>
</>
<0>
<WD>
Barcode
<D><d>
<BL><d>
WL Font
(Basic size 28x52 dots)