SATO WS4 Series - Platen Roller

47
Font
Available for
WS4 series
ESC+RD CG Font
ESC+RD
Hex code
ESC
RD
Parameter
<1B>
16
<52>
16
<44>
16
abb,ccc,ddd,n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies CG font type, font style, font size and print data
[Format]
<RD>abb,ccc,ddd,n~n
● Parameter
a [Font type] = A [CG Times]
B [CG Triumvirate]
b [Font style] = 00 Fixed
c [Horizontal size (width)] = Valid range : 004 to 999 dots. Refer to the table below
Valid range : P02 to P99 points
d [Vertical size (height)] = Valid range : 004 to 999 dots. Refer to the table below
Valid range : P02 to P99 points
n [Print data] = Data
[Coding example]
<A>
<V>100<H>100<P>2
<RD>A00,P10,P10,SATO
<Q>2
<Z>
[Notes]
1. The font size is set by [dot number] or [point number].
2. The dot size does vary with printer type. (Refer to the table below)
3. 1 point is 0.35mm.
[Dot size]
Printer
1 dot size (mm)
WS408DT/TT
0.125
WS412DT/TT
0.083
[Range of font size]
Printer
Valid range:
Horizontal (dots)
Valid range:
Vertical (dots)
WS408DT/TT
4 to 832
4 to 999
WS412DT/TT
4 to 1248
4 to 999
[Valid commands]
Print position
<V>
<H>
Modification
<P>
<%>
<PS>
<PR>
<F>
CG Font