SATO WS4 Series - 12 Graphic Command; ESC+G Graphic Print

168
12. Graphic Command
Graphic
Available for
WS4 series
ESC+G Graphic Print
ESC+G
Hex code
ESC
G
Parameter
<1B>16
<47>16
abbbcccn~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies graphic printing.
[Format]
<G>abbbcccn~n
●Parameter
a [Specifies data in hexadecimal/binary]
H: Hexadecimal 8bit data divided into 2 blocks of 4bit and output in a ASCII-based Hexadecimal code.
B: *Binary 8bit data is handled as 1font data and output in a chunk.
b [Width of the graphic area] = see table below for valid range
c [Height of the graphic area] = see table below for valid range
n [Graphic data]
[Coding Example]
<A>
<V>50<H>50<G>H02000288888888…8888
<Q>2
<Z>
[Notes]
1. “B” Binary format is advantageous to“H” in terms of total data length being 1/2, though it needs prolix programming.
2. The rotation command<%>, expansion command<L> can be used in combination with this command.
[Valid range]
Model
Max. width (byte)
Max. height (byte)
WS408DT/TT
104
600
WS412DT/TT
156
400
Graphic Print