SATO WS4 Series - ESC+GC Recall BMP File

218
Memory Card
Available for
WS4 series
ESC+GC Recall BMP file
ESC+GC
HEX code
ESC
GC
Parameter
<1B>16
<47>16<43>16
aaa
Default setting
None
Persistence of the
command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Recalls and prints a graphic file previously stored by the Store BMP File <GT> command.
[Format]
<GC>aaa
● Parameter
a [Registration number] = 1 to 999
[Coding example]
<A>
<V>100<H>100
<CC>1
<GC>1
<Q>2
<Z>
[Note]
1. The Rotate <%> and the Character Expansion <L> commands can be used for the recalled graphic file.
2. The Card Slot <CC> command must be sent prior to this command.
Recall BMP file