SATO WS4 Series - Maintenance; Cleaning; Printhead

44
Font
Available for
WS4 series
ESC+$= Outline Font Print
ESC+$=
Hex code
ESC
$=
Parameter
<1B>
16
<24>
16
<3D>
16
n~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies printing command of outline font
[Format]
<$=>n~n
●Parameter
n [Print data] = Data
[Coding example] Print data: SATO
<A>
<V>100<H>100<P>2
<$>A,100,100,1
<$=>SATO
<Q>2
<Z>
[Notes]
1. The outline font printing commando <$=> shall be executed after the outline font design selection <$>.
[Valid commands]
Print position
<V>
<H>
Modification
<P>
<%>
<$>
<F>
Outline Font Print