SATO WS4 Series - ESC+FX Datamatrix (Sequential Number)

166
2D Code
Available for
WS4 series
ESC+FX Datamatrix (Sequential Number)
ESC+FX
Hex code
ESC
FX
Parameter
<1B>16
<46>16<58>16
aaabcccdddeee
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies sequential numbering for DataMatrix
[Format] (sequential numbering)
<FX>aaabcccdddeee
●Parameter
a [Number of duplicate labels] = Valid range : 001 to 999
b [Increment / decrement] = + : Increment
- : Decrement
c [Increment/decrement steps] = Valid range : 001 to 999
d [Sequential numbering start position (digit)] = Valid range : 001 to 999 from left side.
e [Incremented data length (digit number)] = Valid range : 001 - 999
[Coding Example] Number of duplicate labels: 001, Increment/decrement: + , Increment/decrement steps: 001,
Sequential number start position: 005, Digit number: 003
<A>
<V>100<H>200
<FX>001+001005003
<BX>01100202000000001
<DC>00006000
<Q>2
<Z>
Sequential Number for
Datamatrix