SATO WS4 Series - WLAN Network Configuration

74
Barcode
Available for
WS4 series
ESC+BI GS1-128 (UCC/EAN128)
<For Standard Carton ID>
ESC+BI
Hex code
ESC
BI
Parameter
<1B>16
<42>16<49>16
aabbbcn~n
Default setting
None
Persistence of
the command
When printer is powered off
Set parameter will not be retained
Validity in a job
Becomes invalid after execution
Validity after a job
Becomes invalid after the job
[Function]
Specifies GS1-128 (UCC/EAN128) for standard carton ID.
[Format]
<BI>aabbbcn~n
●Parameter
a Narrow bar width = Valid range : 01 to 12 dots
b Barcode height = Valid range : 001 to 999 dots
c Font of barcode interpretation = 0 : No interpretation
1 : Above barcode
2 : Below barcode
n Print data = Barcode data (17 digits fixed)
See code table GS-1128 (UCC/EAN128).
EAN128 (for standard carton ID)18 digits fixed
- Identifier of a continuous code for freight packaging
- Type of packaging
- Country, manufacturer code
- Serial number for shipping container
- C/D
* Check digit is automatically added, therefore, specify data in 17 digits excluding check digit.
[Coding Example] Narrow bar width: 03, Barcode height: 150, HRI characters: Below barcode,
Print data: 12345678901234567
<A>
<V>100<H>200<BI>03150012345678901234567
<Q>2
<Z>
[Notes]
1. This command is used only for UCC128 standard carton ID. If EAN128 used for other applications, such as pharmaceutical,
horticultural application, use the command <BG> with appropriate application identifier and delimiters.
2. Start character code /Function character/ End character code, and identifier “00” will be automatically added.
3. Check digit Modulus 10 and Modulus 103 will be automatically generated.
4. Sequential numbering by barcode data is possible.
5. Both character pitch of Barcode and HR interpretation is fixed at 10 dots.
6. In case HR interpretation is longer than the barcode’s width, the translation will be left-aligned to the start of barcode.
7. In case HR interpretation is shorter than the barcode’s width, the translation will be center-aligned.
8. HR interpretation will be printed in OCR-B font.
9. If HR interpretation is out of the printable area, it will not be printed. Consider the output image when determining the
vertical<V> and horizontal<H> print position.
GS1-128 (UCC/EAN128)
<For Standard Carton ID>