SATO WS4 Series - Page 226

220
[Coding example 4] Clearing format 001
<A>
<CC>1
<*>F,001
<Z>
[Coding example 5] Clearing all form overlay
<A>
<CC>1
<*>R
<Z>
[Note]
1. Place this command between the Start Code <A> and the Stop Code <Z> commands.
2. Make sure to specify the slot number with the command <CC> prior to this command.
[Tip]
1. To clear all data of memory card, use the Format Memory Card <FM> command.