88
[Coding example 7] UPC-E Composite(CC-A/CC-B)
<A>
<V>100<H>100
<EU>08041200000123|15021231
<Q>1
<Z>
[Coding example 8] EAN-13 Composite(CC-A/CC-B)
<A>
<V>100<H>100
<EU>0904331234567890|991234-abcd
<Q>1
<Z>
[Coding example 9] EAN-8 Composite(CC-A/CC-B)
<A>
<V>100<H>100
<EU>10041234567|21A12345678
<Q>1
<Z>
[Coding example 10] GS1-128 (UCC/EAN128) with CC-A/B
<A>
<V>100<H>100
<EU>11040260103212345678906|21A1B2C3D4E5F6G7H8
<Q>1
<Z>
[Coding example 11] GS1-128 (UCC/EAN128) with CC-C
<A>
<V>100<H>100
<EU>120402600030123456789012340|02130123456789
093724#101234567ABCDEFG
<Q>1
<Z>
[Note]
1. Parameter feature varies depending on 1D barcode symbologies.
Only GS1 DataBar Expanded Composite(CC-A/CC-B)(EU06) is designable for segment width.
Parameter for height of barcode can be specified for GS1-128 (UCC/EAN128)(EU11,EU12) only.
2. If the invalid value for 1D barcode symbology is set in the data portion, composite symbol will not be printed.
3. The sum of 1D and 2D data up to 2361-digit can be set for the print data parameter. As for 2D data, when 1D barcode symbology
and alphanumeric are mixed, the number of designable data may vary.
If specifying the data exceeding the maximum digit number, barcodes may not be printed properly.
4. Entire size of composite symbol changes depending on the specification of narrow bar width.
5. If composite symbol exceeds the printable area, only the portion within the area will be printed; however, a scanner might read
the value of such composite symbol occasionally.
6. In the specification of composite symbol, 1D barcode data affects the width and height of 2D barcode. When the 1D barcode
width is very small, specifying the data with the valid digit number will not print anything.
7. Print of HRI cannot be designated with this command.
8. The Rotate <%> command is available, but not the Character Expansion <L> command.
9. When specifying 11 (production date), 12 (due date for payment), 13 (packaging date), 15 (sell by date), or 17 (expiration date)
for Application Identifier (AI), specify the valid values to the date (YYMMDD). There is no guarantee for print result if invalid
values are specified.
10. When barcode type is GS1 DataBar, the 2D code data of it should be based on the format of Application Identifier.
To Next Page
Loading...
