www.schaerer.com Configuration
PASCA_TOUCHIT_EN
V02 | 07.2013
48
7) Switch off rinsing If set to "ON":
A hot rinsing procedure is performed imme-
diately after cleaning.
On/off The standard setting is
"OFF".
This setting is useful for
24 h operation.
It avoids a "Water flow er-
ror" when the first coffee is
dispensed after cleaning.
8) - This parameter setting does not appear and
has no function.
- Cleaning with coffee is no
longer available.
9) Grounds container quantity Sets the number of cycles until the "Empty
grounds container" message appears.
► Set the "Under-counter grounds dispos-
al" to (0).
► Enter the standard setting of 35 cycles.
After 35 cycles, the "Empty grounds
container" message appears.
0-999 Standard setting 35.
Do not exceed the stan-
dard setting of 35 coffee
grounds cakes.
The machine blocks dis-
pensing of coffee bevera-
ges after 40 brewing
cycles (+5) until the
grounds container is emp-
tied.
10) General pre-select Preselection of multiple beverages while a
beverage is being dispensed:
If this parameter is activated together with
the "Product preselection" parameter in the
"Configuration" - "Common settings" menu,
multiple beverages can be selected while a
beverage is being dispensed.
On/off The standard setting is
"ON".
11) Mixed preselection Mixed preselection of multiple beverages:
Consecutively selected and different bevera-
ges are dispensed in the order in which the
beverage fields were pressed.
On/off The standard setting is
"ON".
This parameter appears if
the "10 General pre-
select" parameter is acti-
vated.
12) Wait for hot water tempera-
ture
Hot water boiler:
Hot water is not dispensed until the boiler
temperature preset in the "02 Temperature
hot water" parameter has been reached.
There is no dispensing if the temperature is
more than 8°C below the preset tempera-
ture.
On/off The standard setting is
"ON".
Note the "13 Hot water
heat to set temp" parame-
ter.
13) Hot water heat to set temp Hot water from the coffee boiler:
Hot water is not dispensed until the boiler
temperature preset in the "02 Temperature
hot water" parameter has been reached.
On/off The standard setting is
"OFF".
This parameter appears if
"From coffee boiler" was
selected in the selection
menu under the "06 Hot-
water source" system
parameter.
Parameters: General Parameters
Display text Description Setting range Notes
To Next Page
Loading...
