PASCA_TOUCHIT_EN
V02 | 07.2013
67
www.schaerer.comConfiguration
7) Filter exchange after litres Specifies the flow quantity in litres until the fil-
ter needs to be changed.
► Select the field.
The keypad appears.
► Enter the quantity and confirm using the
field.
Message:
When the set number of litres is reached, a
message appears on the display.
This message can only be cleared using the
SERVICE card.
See "Info" - "Counters and statistics"- "Ser-
vice counters".
► Clear the counter during the first installa-
tion of the filter.
0-99999 l The standard setting "0" is
without a message.
When installing the filter
for the first time:
Follow the manufacturer
instructions regarding the
filter decalcification unit.
8) Filter exchange after months Specifies the interval in months to a filter
change.
► Enter the number of months.
Message:
When the set interval is reached, a message
appears on the display.
This message can only be cleared using the
SERVICE card.
See "Info" - "Counters and statistics"- "Ser-
vice counters".
► Clear the counter during the first installa-
tion of the filter.
0-24 months The standard setting "0" is
without a message.
When installing the filter
for the first time:
Follow the manufacturer
instructions regarding the
filter decalcification unit.
9) Service request after coffees Specifies the number of coffees dispensed
before a filter change becomes necessary.
► Select the field.
The keypad appears.
► Enter the quantity and confirm using the
field.
Message:
When the set number of dispensed coffees is
reached, a message appears on the display.
This message can only be cleared using the
SERVICE card.
See "Info" - "Counters and statistics"- "Ser-
vice counters".
► Reset the counter during the initial instal-
lation using the "0 Last filter change" pa-
rameter.
0-99999 cups The standard setting "0" is
without a message.
Parameters: Date / Time / Alarm
Display text Description Setting range Notes
To Next Page
Loading...
