Shimadzu LC-40D XR CL User Manual

n Setting the usage of the parts management tool《PARTS MGMT TOOL》
Sets the usage of the parts management
tool.
For details on the parts management tool
(PARTS MGMT TOOL), refer to the PARTS
MGMT TOOL instruction manual.
Set value Description
0 Do not use PARTS MGMT TOOL.
1 Use PARTS MGMT TOOL.
When the setting is changed, the change is recorded in the operation log.
"Displaying the operation log《OPERATION LOG》" P.51
n Changing the password《PASSWORD SETTING》
Enables to change the password.
1
Press [Enter].
The input screen is displayed.
2
Input the five-digit number by using
the numeric keypad, and press [Enter].
3
To confirm, input the same password
that was input in step 2 again.
When the input is completed and the
password is changed, the message
"PASSWORD CHANGED" is displayed. Then,
the password change is recorded in the
operation log.
If the password input is not correct, the
message "PASSWORD WRONG" is
displayed. At this stage, the password has
not been changed yet.
4
Press [Enter] to return to the title screen.
LC-40D X3 CL LC-40D XR CL
63
3.6 VP Functions Screen
3

Shimadzu LC-40D XR CL Specifications

General

Brand	Shimadzu
Model	LC-40D XR CL
Category	Laboratory Equipment
Language	English