SICK DL100 Pro User Manual

8024484/2019-06-06 • © SICK AG • Subject to change without notice 105
PROFINET IO interface
10.3.15 Module 30: “Serial No/i8b“
Type Input module, 8 byte
Description The serial number of the device can be queried using this module.
Input values
Rel. Adr. Description
0 Serial number display, unused characters at the end of the
stringarelledwith0bytes(0x00).
Type
• 8 ASCII characters
10.3.16 Module 31: „Product Code/i9w”
Type Input module, 18 bytes
Description The product code of the device can be queried using this module.
Input values
Rel. Adr. Description
0 Display of the product code, e.g. DL100-XXXX.
Unusedcharactersattheendofthestringarelledwith
0 bytes (0x00).
Type
• 18 ASCII characters
10.3.17 Module 32: “Version HW/i8b”
Type Input module, 8 byte
Description The version number of the device hardware can be queried using this
module.
Note If the value is not present in the device, a zero byte (0x00) is transmitted
for each character.
Input values
Rel. Adr. Description
0
Display of version number of the device hardware as a
string in the form “YYYYWWnnnn”. “nnn” is a consecutive
number.
Type
• 8 ASCII characters

SICK DL100 Pro Specifications

General

Output	Analog
Operating Temperature	-10 °C to +50 °C
Light source	Laser
Output type	Analog
Supply voltage	10 V DC to 30 V DC
Housing material	Plastic
Connection type	M12 connector
Power consumption	≤ 3 W