SICK DL100 Pro

Operation via Ethernet (Ethernet interface)
62 © SICK AG • Subject to change without notice • 8024484/2019-06-06
“Userinformation”eld
Parameters Description
User
input 1
Input optional user information.
Read/write access
• Read and write
Factory setting
• Empty
User
input 2
→ See “User input 1” parameter.
User
input 2
→ See “User input 1” parameter.
Table 31: “User information” page – “User information” eld
“Saveuserinputs”eld
Parameters Description
Save user inputs User information can only be input at the “Maintenance
technician” user level. The password “esick” is required.
Read/write access
• Write only
Table 32: “User information” page – “Only save user inputs” eld
9.2.3 Measurement Data
“Distancevalue”eld
Parameters Description
X-scale Enter X-axis for visualization of the distance value.
Read/write access
• Read and write
Unit
• s
Y min / Y max Enter minimum and maximum value for the Y-axis.
Read/write access
• Read and write
Unit
• m
Auto-Scale Y Clicking on the “Auto-Scale Y” button adjusts the display to the
present measured values.
Read/write access
• Read and write
Unit
• m
Table 33: “Measurement data” eld – “Distance value” eld