SICK DL100 Pro

8024484/2019-06-06 • © SICK AG • Subject to change without notice 73
Operation via Ethernet (Ethernet interface)
9.2.7 Methods
Field Description
Device restart • Clicking on the “Restart” button causes the device to
restart.
Read/write access
• Write only
Laser control Turnthelaseronandoasfollows:
• Select the desired option using the selection bar.
• Click on the buttons to execute the option.
Read/write access
• Write only
Input value
• 0:O/1:On
Factory setting
• o
Heater control Control the heater as follows:
• Select the desired option using the selection bar.
• Click on the buttons to execute the option.
Read/write access
• Write only
Input value
• 0:O/1:On/2:Auto
Factory setting
• Auto
Table 53: “Methods” page