Electrical connection
40 © SICK AG • Subject to change without notice • 8024484/2019-06-06
7.3 Connecting the distance measuring device electrically
NOTE!
The connection diagram and information on inputs and
outputs can be found on the type label on the distance
measuring device.
1. Ensure the voltage supply is not connected.
2. Connect the measuring device according to the connection diagram.
• Connection 1 “supply voltage”
• Connection 2 “Ethernet port 1”
• Connection 3 “Ethernet port 2”
12
34
Fig. 22: Position of the electrical connections
1 Voltage supply connector
2 Female connector for Ethernet port 1
3 Female connector for Ethernet port 2
4 SSI male connector
To Next Page
Loading...
