SICK DL100 Pro

Safety
16 © SICK AG • Subject to change without notice • 8024484/2019-06-06
2.6 Warning symbol on the device
A class 2 laser is installed in the DL100 Pro distance measuring device.
The measuring device is labeled with a warning.
Complies with 21 CFR 1040.10
and 1040.11 except for
deviations
pursuant to laser
notice
No. 50,
date June 24, 2007
EN/IEC 60825-1:2014
MEAN OUTPUT P
O
<1mW
CW-MODULATION ± 0.85 P
O
WAVELENGTH = 655nm
FREQUENCY ≥ 90 MHz
Fig. 1: Warning symbol on the device: Class 2 laser (EN/IEC 60825-1:2014)
Identical laser class for issue EN/IEC 60825-1:2007
Complies with 21 CFR 1040.10
and 1040.11 except for the
listed tolerances in the document
“Laser Notice No. 50,
dated June 24, 2007.
Laser radiation – Never look into
the light beam – Laser class 2
(EN/IEC 60825-1:2014)
Laser output aperture