SICK DL100 Pro

8024484/2019-06-06 • © SICK AG • Subject to change without notice 33
Mounting
6.7 Mounting the alignment bracket and distance measuring device
The distance measuring device is mounted using the optional alignment
bracket.
→ For dimensions and part numbers, see Page 116, Chapter 15.1.
Observe the following points:
• Mounting instructions: → See Page 26, Chapter 6.2.
• The operation must be accessible.
1. Mount the alignment bracket above the four slotted holes. The align-
ment bracket is suitable for mounting on horizontal and vertical
surfaces.
1
1
2
Fig. 13: Mounting the alignment bracket
1 M5 mounting screw
2 Alignment bracket
2. Unscrew the knurled screw until the distance measuring device can
bettedinplace.
3. Insert the distance measuring device into the alignment bracket.