SICK DL100 Pro

8024484/2019-06-06 • © SICK AG • Subject to change without notice 45
Operating the measuring device
8.5.3 “HwVers” menu
The “HwVers” menu displays all information relating to the hardware.
The “HwVers” menu is accessed via the following menu path:
Main menu →
→ Menu → → SwVers → → HwVers
Press the
pushbutton to display the “HwVers” parameter.
Parameters Description
HwVers Displays the version number
Table 12: “HwVers” menu
8.5.4 “Pron”menu
The“Pron”menuisaccessedviathefollowingmenupath:
Main menu → → Menu → →Pron
Press the
pushbutton to display the “StName” parameter.
You can scroll within the menu using the
and pushbuttons.
Press the pushbutton to display the relevant parameter value.
Parameters Description
StName Station name display
Factory setting
• dl100hf
ResDst Select the resolution for the “distance” output value in mm
using the digital data interface. The measured value is multi-
plied by the resolution. The parameter does not have any
inuenceonthemeasuredvalueshownonthedisplay.
Requirements
The parameter is only displayed if the “Yes” option is selected
for the “more” parameter.
Options
• 0.1
• 0.125
• 1.0
• 10.0
• 100.0
• freRes
Factory setting
• 0.1 mm