SICK DL100 Pro

PROFINET IO interface
102 © SICK AG • Subject to change without notice • 8024484/2019-06-06
Module parameters
Name Description
Frequency Mode The “Frequency Mode” range only applies to variants with the
frequency changeover feature (DL100-2xxBxxxx).
Change in laser emission frequencies in order to avoid faults
caused by interference from adjacent devices
Value range
• Mode 0
• Mode 1
• Mode 2
Default value
• Mode 0
10.3.14 Module 26: “SSI”
Type Congurationmodule,noinputandoutputdata
Description This module is used to set the SSI interface.
Module parameters
Name Description
SSI Distance
Resolution
Determines the resolution of the distance value on the SSI
interface. 1 digit can correspond to 0.1 mm, 0.125 mm,
1 mm, 10 mm or 100 mm.
Value range
• 0.1 mm
• 0.125 mm
• 1 mm
• 10 mm
• 100 mm
• free Distance Resolution
Default value
• 0.1 mm
free Distance
Resolution [µm]
Determines the resolution of the distance value on the SSI
interface if the “free Distance Resolution” value has been
selected in the “SSI Distance Resolution” parameter.
Value range
• 1...100,000μm
Default value
• 100μm