SICK DL100 Pro User Manual

8024484/2019-06-06 • © SICK AG • Subject to change without notice 11
General
1.2 Explanation of symbols
Warnings Warnings in these operating instructions are labeled with symbols. The
warnings are introduced by signal words that indicate the extent of the
danger.
These warnings must be observed at all times and care must be taken to
avoid accidents, personal injury, and material damage.
DANGER!
… indicates a situation of imminent danger, which will
lead to a fatality or serious injuries if not prevented.
WARNING!
… indicates a potentially dangerous situation, which may
lead to a fatality or serious injuries if not prevented.
CAUTION!
… indicates a potentially dangerous situation, which may
lead to minor/slight injuries if not prevented.
WARNING!
… indicates a possible hazardous situation which may
lead to physical damage if it is not avoided.
Tips and recommendations
NOTE!
… highlights useful tips and recommendations as well as
information for ecient and trouble-free operation.

SICK DL100 Pro Specifications

General

Output	Analog
Operating Temperature	-10 °C to +50 °C
Light source	Laser
Output type	Analog
Supply voltage	10 V DC to 30 V DC
Housing material	Plastic
Connection type	M12 connector
Power consumption	≤ 3 W