SICK DL100 Pro

Technical data
118 © SICK AG • Subject to change without notice • 8024484/2019-06-06
15.4 Supply
Supply voltage V
S
18 V DC … 30 V DC
Current consumption • Without heating: < 250 mA at 24 V DC
• With heating: < 1,000 mA at 24 V DC
Residual ripple < 5 V
ss
within the permissible supply voltage U
V
Protection class III
Operation only permitted in PELV (protective extra low voltage – safety
extra-low voltage) systems.
Table 70: Supply
15.5 Inputs
Inputs MF1 multifunctional input, adjustable
• Hi > 12 V
• Lo < 3 V
→ See Page 50, Table 17, parameter “ActStat”.
Circuit protection None; no reverse-polarity protection.
Table 71: Inputs
15.6 Outputs
Outputs MF1 and MF2 multifunctional outputs, type B (push/pull), adjustable
• Hi > UV –3 V
• Lo < 2 V
→ See Page 50, Table 17 and Page 56, Table 22, parameter
“ActStat”.
Maximum output current Max. 100 mA
Output load • Capacitive: 100 nF
• Inductive: 20 mH
Table 72: Outputs
15.7 Interfaces
Data interface PROFINETIO/RTConformanceClassB,PNspecicationV2.33,
process data interface, access via SOPAS ET
Data transmission rate 100 Mbps, full duplex
SSI Process data interface
SSI baud rate Depending on the length of cable
Ethernet Congurationinterface
Table 73: Interfaces