SICK DL100 Pro

Mounting
30 © SICK AG • Subject to change without notice • 8024484/2019-06-06
6.5 Arranging a distance measuring device with adjacent data transfer
photoelectric sensor
6.5.1 Assignment to ISD300, ISD400-1xxx or ISD400-6xxx
A beam separation of at least 100 mm must always be maintained during
mounting with a ISD300, ISD400-1xxx, and ISD400-6xxx series data trans-
fer photoelectric sensor. The maximum scanning range has no impact on
the minimum distance.
Formula a≥100mm
a




S
et
E
s
c
<
<
Fig. 11: Arranging a distance measuring device with an ISD data transfer
photoelectric sensor
1 DL100 Pro distance measuring device
2 Reector
3 ISD300, ISD400-1xxx, or ISD400-6xxx data transfer photoelectric sensor
a Minimum distance