SICK DL100 Pro

8024484/2019-06-06 • © SICK AG • Subject to change without notice 103
PROFINET IO interface
“SSI” module parameter
(continued)
Name Description
SSI Protocol
Conguration
Determines the data format for the SSI interface. For more
information, see Page 47, Chapter 8.5.5.
Value range
• Gry24E: 24 Bit gray + Error (binary)
• Gry24: 24 Bit gray
• Gry25: 25 Bit gray
• G25DME: 25 Bit gray, DME compatible
• G24+8: 24 Bit gray +8 Status bit (binary)
• Bin24E: 24 Bit binary + Error (binary)
• Bin24: 24 Bit binary
• Bin25: 25 Bit binary
• B24+8: 24 Bit binary +8 Status bit (binary)
Default value
• Gry24E: 24 Bit gray + Error (binary)
Plausibility
Warning
Determines the data format for the SSI interface. For more
information, see Page 47, Chapter 8.5.5.
Value range
• o
• on
Default value
• o
Level Warning Determines whether the error bit is set with the selected SSI
protocol “Gry24E” or “Bin24E” with a level warning. For more
information, see Page 47, Chapter 8.5.5.
Value range
• o
• on
Default value
• o
Laser Warning Determines whether the error bit is set with the selected SSI
protocol “Gry24E” or “Bin24E” with a laser warning. For more
information, see Page 47, Chapter 8.5.5.
Value range
• o
• on
Default value
• o