FS20 Marine Fire Detection Control Panel
Siemens Industry, Inc. A6V10519176_enUS_b
Building Technologies Division
NOTICE
Data Loss During the Firmware Update
Configuration data and event memory are deleted in the ‘Panel’.
• Load the configuration data and event memory to the configuration tool before updating the
firmware.
NOTICE
Power Failure During the Firmware Update
Firmware is not updated and ‘Panel’ is not working. The firmware update cannot be repeated and
must be performed by the manufacture.
• Do not disconnect the ‘Panel’ from the power supply during the firmware update.
To Next Page
Loading...
Need help?
General
