Procedure
1. Open the HW Config catalog (PCS 7 profile) and select the appropriate IM 153-2HF from
the PROFIBUS DP/ET 200M folder.
2. Enter the DP address of the PROFIBUS DP slave in the DP slave properties. You can also
select the subnet for the DP slave (here, PROFIBUS (0)). With an H system, the system
automatically establishes the connection to the redundant subnet PROFIBUS (1).
Configuration of the hardware (AS and I/O)
6.5 Configuration of the I/O devices
Compendium Part A - Configuration Guidelines (V8.2)
Configuration Manual, 08/2016, A5E38166869-AA 115
To Next Page
Loading...
