Siemens SIMATIC PCS7 Function Manual

6.11.2.4 How to open websites via maintenance links
Introduction
Up to 3 Web pages which are used to provide support for diagnostics measures can be called.
The icons are displayed when the calls are configured.
Requirements
● The Maintenance Station is available in the MS Standard version.
● The maintenance target (web address) has been configured.
● The maintenance target can be accessed via the network.
Icon in the user interface
Icon Function Explanation Permission
Open maintenance link
1
Open of the config‐
ured web address
"Higher process controlling" for diagnostics
area
Open maintenance link
2
Open maintenance link
3
Procedure
1. Click on the icon.
Result
The web page is displayed in a screen window.
6.11.2.5 How to open the online view of HW Config
Introduction
The "Call hardware project" icon is used to call the online view of the hardware configuration
(HW Config).
Note
This function is available for the maintenance station in the MS Standard version.
The hardware project can be called if the MS client is operated on the ES.
Operator control and monitoring
6.11 Faceplate
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA 139

Siemens SIMATIC PCS7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS7
Category	Control Systems
Language	English