The overview screen is the highest hierarchy level. You get to the respective area overview
screen via the maintenance group displays of an area.
The components are displayed as block icons in the area overview screen.
The working area also displays faceplates, operator control windows, message lists and dialog
windows.
Navigation information can be displayed in the diagnostic screens. You can find information
on configuring in the section "Navigation information in the screen (Page 67)".
Additional information
You can find additional information in the following sections:
● Overview screen (Page 95)
● Area overview screens (Page 117)
● Block icon (Page 119)
● Faceplate (Page 131)
6.3 Overview screen
Introduction
The maintenance engineer gets an overview of the plant status of the entire plant in the
overview screen.
A maintenance group display is displayed in each area if there is at least one screen for this
area. The areas are shown in color as shown below:
● PC stations (on a yellow background)
● Network objects (on a green background)
● AS/system (cyan background)
● Field devices (cyan background)
● User objects (on a light blue background)
The following figure shows an example of the overview screen for the diagnostics area:
Operator control and monitoring
6.3 Overview screen
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA 95
To Next Page
Loading...
Need help?
General
