After OS compilation and subsequent download, the changes are applied in the process
control.
Additional information
You can find additional information in the section "Creating/updating the diagnostic screens
(Page 80)"
5.11.2.2 Storage location for the files of the (filtered) total export
Introduction
In the "Storage location for the files of the (filtered) total export" area of the "Other settings"
dialog, you specify the user-specific storage location for the files of the (filtered) total export.
The user-specific target directory can be configured as an absolute or relative path.
Path Example of a storage path Storage location
Absolute path D:\folder On the MS server(s) in the con‐
figured path
Relative path \\computer name\shared drive
\folder
On the specified computer in the
configured path
In a redundant system, the total export file is saved on the MS server and on the redundant
partner when using an absolute path.
Requirement
The Maintenance Station has been created.
Procedure
1. Open the plant view in the SIMATIC Manager.
2. Select the object in the tree view:
– If you are using a multiproject, select the object "[name of the project] MP".
– If you are using a single project, select the object "[name of the project]".
3. Select the menu command Options > Plant Hierarchy > Advanced Diagnostics Settings....
The "Advanced Diagnostics Settings" dialog box opens.
4. Select the "Other settings" tab.
5. Specify the storage location for the files of the (filtered) total export.
6. Click "OK".
These settings are saved retentively.
Configuring the maintenance stations
5.11 Advanced diagnostics settings
Maintenance Station
66 Function Manual, 03/2016, A5E36187641-AA
To Next Page
Loading...
Need help?
General
