Procedure
1. Open the plant view in the SIMATIC Manager.
2. In the tree view, select the hierarchy folder for which you want to create the user diagnostic
screen.
3. Select the menu command Insert > Technological Objects > Picture.
4. Enter a unique name that is as short as possible and confirm with the Enter key.
The name is applied.
5. Click "OK".
6. Select the picture in the detail view and select the menu command Edit > Object
properties... .
7. Select the "Block icons" tab.
8. Select the "Derive icons from the plant hierarchy" check box.
9. Repeat steps 2 through 9 for all hierarchy folders into which you wish to insert user
diagnostic screens.
5.13.7 How to create the group display hierarchy for the user diagnostics
Introduction
You will need to refer to the information in this section if you have added a user-specific
diagnostic structure to the diagnostic structure.
Requirement
The WinCC project is opened:
● In an MS single station system, this is the WinCC project of the MS.
● In an MS multiple station system, it is the WinCC project of the MS server.
Procedure
1. In the WinCC Explorer tree view select the "Project Editor".
2. Open the shortcut menu and select the menu command Open.
The "OS Project Editor" dialog box opens.
3. Select the "Message Representation" tab.
4. Enable the "Create/Update Group Displays" check box in the "Group display hierarchy"
group.
5. Click "OK".
The group displays for the hierarchy calculation are automatically inserted into the screens
when the hierarchy is saved, the OS is compiled or the OS is downloaded.
Configuring the maintenance stations
5.13 Configuring the user diagnostics
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA 75
To Next Page
Loading...
Need help?
General
