5.19 Compiling and downloading
5.19.1 Compilation and downloading of the Maintenance Station
Compiling and downloading an MS single station system or multiple station system
● Compile
The diagnostic screens you generated or updated must be compiled and downloaded to
the maintenance station.
Before you compile the maintenance station, the diagnostic screens have to be created at
least once or updated after configuration changes.
"Area-oriented" must be set as OS compilation mode.
In an MS single station system, compile the MS.
In an MS multiple station system, compile the MS server.
Note
Clear the "Picture Tree" check box in the dialog for OS compilation if you do not want to
derive the hierarchy from the plant areas.
The hierarchy for the diagnostic area is created even if the check box is cleared.
● Downloading
Perform the download after the compilation.
If you are using an MS multiple station system, load the MS server.
If you are using a redundant MS multiple station system, download the MS server and the
redundant partner.
You must not download an MS single station system.
5.19.2 Compiling and downloading SIMATIC PDM MS
Requirements
● Configuration in the process device network view has been completed.
● The parameter view for all field devices has been opened once.
● The "Create/update diagnostics screens" function has been executed.
● The project is open in SIMATIC Manager.
Configuring the maintenance stations
5.19 Compiling and downloading
Maintenance Station
82 Function Manual, 03/2016, A5E36187641-AA
To Next Page
Loading...
Need help?
General
