Siemens SIMATIC PCS7 Function Manual

3.5 SIMATIC PDM MS
Plant configuration
SIMATIC PDM MS is a single-station system pre-configured as an IPC Microbox 427D. It is
designed for stand-alone use and is independent of the automation solution used. It is based
on a PCS 7 Maintenance Station. All operating and monitoring functions are executed on this
PC station.
SIMATIC PDM MS processes diagnostic information that is determined via SIMATIC PDM.
SIMATIC PDM MS uses diagnostic screens to visualize the diagnostic status in the diagnostic
area and provide the required operator control and monitoring functions.
The automation system is mapped in the software with one integrated AS RTX (WinLC RTX).
The diagnostic messages are produced in the integrated AS RTX and visualized on SIMATIC
PDM MS.
Using the Maintenance Station
3.5 SIMATIC PDM MS
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA 25

Siemens SIMATIC PCS7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS7
Category	Control Systems
Language	English