Siemens SIMATIC PCS7

The following table shows the assignment of the identification data displayed on the MS to the
origin.
Identification data Origin
TAG / HID Profile tag "TAG_DESC"
LID HW Config "Designation"
Address HW Config "Slot/address information"
Description Profile tag "DESCRIPTOR"
Message Profile tag "DEVICE_MESSAGE"
Device type Profile tag "DEVICE_ID"
Manufacturer Profile tag "DEVICE_MAN_ID"
Article number
1)
Not available
Serial number Profile tag "DEVICE_SER_Num"
Installation date Profile tag "DEVICE_INSTAL_DATE"
HW revision Profile tag "HARDWARE_REVISION"
SW revision Profile tag "SOFTWARE_REVISION"
Last update Time stamp of the updating of the PDM database
Comment HW Config/Object properties "Comment"
1)
Article number = also order number or MLFB
I&M profile according to PNO
The data are displayed if they can be read from the device.
The following table shows the assignment of the identification data displayed on the MS to the
origin.
Identification data Origin
TAG / HID Profile tag "TAG_FUNCTION"
LID HW Config "Designation"
Address HW Config "Slot/address information"
Description Profile tag "DESCRIPTOR"
Message Not available
Device type Profile tag "PROFILE_ID"
Manufacturer HW Config Type or Short description
Article number
1)
Profile tag "ORDER_ID"
Serial number Profile tag "SERIAL_NUMBER"
Installation date Profile tag "INSTALLATION_DATE"
HW revision Profile tag "HARDWARE_REVISION"
SW revision Profile tag "SOFTWARE_REVISION"
Last update Time stamp of the updating of the PDM database
Comment HW Config/Object properties "Comment"
1)
Article number = also order number or MLFB
Operator control and monitoring
6.12 Origin of the identification data
Maintenance Station
Function Manual, 03/2016, A5E36187641-AA 187