Siemens SIMOTION SCOUT User Manual

6.6.2 Using MCC
6.6.2.1 Overview
Program creation steps
Creation of an MCC program encompasses the following steps:
1. Create the MCC source.
2. Create the MCC chart in the MCC source.
3. Insert MCC commands in the MCC chart.
Configuring/parameterizing
6.6 Programming the SIMOTION application
SIMOTION SCOUT
Configuration Manual, 11/2016 113

Siemens SIMOTION SCOUT Specifications

General

Brand	Siemens
Model	SIMOTION SCOUT
Category	Control Unit
Language	English