Siemens SIMOTION SCOUT

Fundamental safety instructions
2
2.1 General safety instructions
WARNING
Danger to life if the safety instructions and residual risks are not observed
The non-observance of the safety instructions and residual risks stated in the associated
hardware documentation can result in accidents with severe injuries or death.
● Observe the safety instructions given in the hardware documentation.
● Consider the residual risks for the risk evaluation.
WARNING
Danger to life caused by machine malfunctions caused by incorrect or changed
parameterization
Incorrect or changed parameterization can cause malfunctions on machines that can result
in injuries or death.
● Protect the parameterization (parameter assignments) against unauthorized access.
● Respond to possible malfunctions by applying suitable measures (e.g. EMERGENCY
STOP or EMERGENCY OFF).
SIMOTION SCOUT
Configuration Manual, 11/2016 13