example, the connection of the engineering system via network nodes and the creation of
routing connections.
Additional references
Detailed information can be found in:
● Online help,
SIMOTION SCOUT Getting Started
●
SIMOTION SCOUT Communication
System Manual
13.5 HMI
Overview
The Human Machine Interface (HMI) connects the world of automation with the individual
demands of the operator. As part of TIA, SIMATIC HMI supports uniform engineering under
Windows, accesses common data and communicates uniformly.
For efficient machine operation and monitoring in various performance classes, you can use
the following panels recommended for SIMOTION as well as PC-based panel systems with
membrane keyboards or touch screen operation:
● Panels
For efficient machine operation and monitoring in various performance classes, either text-
based or graphics-capable with membrane keyboards or touch screen operation.
● Multi-panels
These can be used for operator control and monitoring in the same way as the panels, with
operation by means of touch screens or membrane keyboards. Multi-panels (MP) also
permit the installation of additional applications and therefore provide typical PC flexibility.
● Panel PCs
Are designed for demanding environmental conditions and provide the same degree of
robustness and suitability for industry.
The WinCC flexible engineering software is available for the display of the user interface.
Additional references
Detailed information can be found in:
● Catalog: SIMOTION, SINAMICS S120 and Motors for Production Machines
● PM 21 Catalog.
Product combinations
13.5 HMI
SIMOTION SCOUT
Configuration Manual, 11/2016 219
To Next Page
Loading...
Need help?
General
