7.7 Archive project data to memory card
The Target system > Load > Archive project on card... function archives the complete SCOUT
project on the MMC/CompactFlash card or the internal CFast or SSD of the P320-4 .
The Target system > Copy archived project from card to the PG/PC... function loads the
archived SCOUT project from the card or the hard disk.
A zip file is archived. This function is only possible in the online mode. In addition to the zip
file, an info file is saved. The Target system > Load > Copy archived project from card to PG/
PC function can be used for this purpose. The following contents are written to the info file:
● The project name
● The size of the zipped project file
● The storage date
For further information, see also Section Service with SIMOTON SCOUT (Page 197).
7.8 Loading to the file system
As for a download to the target device, select Edit > Target system > Download to file
system to save data of a device to a Memory Card / CF card directly via a card adapter on the
PC. Alternatively, the device data can also be saved locally on a hard disk. The data can then
be copied later to a Memory Card / CF card.
Note
A project is always created for exactly one kernel version and one device type and will only
run on the relevant SIMOTION device if this exact kernel version and this device type are
available. If this is not the case, the SIMOTION device remains in STOP operating state.
For further information, please refer to the online help for SIMOTION SCOUT.
Target system
7.8 Loading to the file system
SIMOTION SCOUT
162 Configuration Manual, 11/2016
To Next Page
Loading...
Need help?
General
