● Import technology objects (TO)
● Interconnect technology objects (synchronous operation interconnection)
● Write configuration data and system variables to technology objects
● Import libraries:
– Change code
– Version check and version update
– Setting and restoring constants
– Creating and restoring user areas
● Import units
– Change code
– Version check and version update
– Set and restore constants
– Create and restore user areas
6.8.2 Integrating the ProjectGenerator
Integration in SCOUT
As of version V1.3, the ProjectGenerator can be integrated in SCOUT. The ProjectGenerator
does not require an installation. You can integrate the ProjectGenerator via the menu Options
> Settings..., ProjectGenerator tab directly from a DVD or the local hard disk. Select the path
to the ProjectGenerator.exe file.
You then use the ProjectGenerator via the menu item Project > ProjectGenerator.
Note
The path must always be valid. If the DVD is removed from the drive or the local folder is
deleted, an error message is issued.
Additional references
You can find additional information on this topic in the SIMATIC/SIMOTION Project Generator
Application Manual.
6.9 Configuring multilingual messages
Multilingual messages and comments can be configured with the "Language-dependent texts"
function. This is necessary, for example, if you want to output multilingual user-defined
Alarm_S messages or diagnostic buffer entries.
Configuring/parameterizing
6.9 Configuring multilingual messages
SIMOTION SCOUT
132 Configuration Manual, 11/2016
To Next Page
Loading...
Need help?
General
