Note
Libraries are compiled only for the device versions in which they are used.
6.3.5 Performing a consistency check
Checking the project for consistency and compiling the project
Before you download the project to the target system, the program sources must be compiled
without error and the consistency ensured. In this process, I/O addresses or TO configurations
are checked, for example.
1. Select the Project > Save and compile all menu.
2. SIMOTION SCOUT compiles all the changed sources.
3. Select the Project > Check consistency menu.
SIMOTION SCOUT checks, for example, whether all technology objects have been configured
and that the source files have been compiled without errors.
To compile all programs automatically before a download and to check the consistency, the
Compile all programs before loading and Check consistency before loading checkboxes must
be activated via Options > Settings on the Download tab.
For further information, please refer to the online help for SIMOTION SCOUT.
6.3.6 Archiving and backing up projects on memory cards
Procedure
In SIMOTION SCOUT, you can back up your project to the memory card as a *.zip file.
Proceed as follows to archive the SIMOTION project on the memory card:
1. Open SIMOTION SCOUT and select the Project -> Archive -> Normal... menu command.
2. In the Archive dialog, select the SIMOTION project and save it to your drive (PG/PC).
3. Open the project.
4. Go online with SIMOTION.
Configuring/parameterizing
6.3 Managing projects
SIMOTION SCOUT
72 Configuration Manual, 11/2016
To Next Page
Loading...
Need help?
General
