Siemens SIMOTION SCOUT

6.6.3 Using LAD/FBD
6.6.3.1 Overview
Program creation steps
The creation of an LAD/FBD program encompasses the following steps:
1. Create an LAD/FBD source.
2. Create an LAD/FBD program in the LAD/FBD source.
3. Insert LAD/FBD commands in the LAD/FBD program.
4. Save and compile the LAD/FBD program.
Configuring/parameterizing
6.6 Programming the SIMOTION application
SIMOTION SCOUT
120 Configuration Manual, 11/2016