Figure 7-2 DEVICE
It is therefore possible to configure both access points for a device and to go online via these
points.
7.2.2 Available nodes
The "Accessible nodes" function in SIMOTION SCOUT enables you to identify devices in a
network, apply them to a project, and go online with them.
Note
The search for accessible nodes assumes that no online connection with an opened project
exists.
Displaying accessible nodes
Proceed as follows to identify accessible nodes:
1. Select Project > Accessible nodes in the menu.
All the devices found in the network are listed in the working area below the Accessible
Nodes folder. Type information is also displayed for the devices.
Target system
7.2 Going online/offline with SIMOTION SCOUT
SIMOTION SCOUT
Configuration Manual, 11/2016 149
To Next Page
Loading...
