V800 Series High Performance Closed-Loop Vector Inverter User Manual
2.4 PRODUCT TECHNICAL INDEX AND SPECIFICATIONS
Three phase(4T# series) 380V 50/60Hz
Low frequency mode：0.0~300.00Hz；
High frequency mode：0.0~2000.0Hz.
V800-4T0030G/4T0040P and power below ：Standard configuration:
5-circuit digital input (DI)
V800-4T0040G/4T0055P and power above：Standard configuration:
6-circuit digital input (DI), extensible to 16-circuit (optional extension
components)
V800-4T0030G/4T0040P and power below：Standard configuration:
1-circuit digital output (DO)
V800-4T0040G/4T0055P and power above：Standard configuration:
2-circuit digital output (DO)
0~100.0KHz pulse input, can receive OC or 0~24V level signal
(optional)
0 -100.0KHz pulse output(optional), PWM output mode can be selected
to extend analog output terminal.
Standard configuration: 0~10V voltage intput (AI1);
0~20mA current input (AI2)
Standard IO board: -10V~10V voltage input
Two-circuit 0-10V analog output signal
(can be set to 0~10V current output mode)
Standard one group of AC 250V/2A normally open and closed contacts,
extensible 1-6 groups normally open and closed contacts
To Next Page
Loading...
