Simrad ST90 - Rearranging the Layout of the ST90 Presentation

457420/A
95
RearrangingthelayoutoftheST90presentation
Eachoperatingmodeispresentedwithasetofviews.Theseareplacedatdifferentpositions
withdifferentsizes.WiththeDockingViewsfunctionyoucanmoveandre-sizetheviews
intheST90presentation.
Context
Thephysicallocationandsizeofeachviewcanbechangedindividually.Thecontentina
viewthatchangessizewillautomaticallybeadjustedtotakefulladvantageofthespace
available.
Procedure
1Werecommendthatyourstsaveyourcurrentusersettings.
Whenacompletereorganisationoftheviewpositionsandsizeshavebeencompleted,
youmaywishtorestoretheST90presentationtowhatitwasbeforeyouchangedit.
YoumustusetheUserSettingsdialogboxtodothis.Wesuggestthatyousaveyour
currentusersettingsbeforeyouactivatetheDockingViewsfunction.
aObservetheMainmenu.
bSelectUserSettings.
cSelectSaveCurrentSetting.
dTypeanamefortheusersetting.
eSelectOKtosavethechosenname.
fSelectOKtoclosethedialogbox.
2OpentheDisplaymenu.
3SetDockingViewstoOn.
4Clickinthetitlebaroftheviewthatyouwanttomove.
Theframeoftheselectedviewwillchangecolourtoindicatethatithasbeenselected.
5Pressthemousebutton,andkeepitdepressedtodragtheselectedviewtoanother
positionintheST90presentation.
Thedockingpositionsshowyouwheretodraganddroptheselectedview.Anyview
canselected,andthenrepositionedasindicatedbythedockingpositions.
Relatedtopics
Settinguppresentationmodesandviews,page94
Movingaviewtoanotherdisplay,page94
Restoringthelocationsandsizesoftheviews,page96
Operatingprocedures